Compliance
The Fall-Pac soft landing system complies with the Work at Height (Amendment) Regulations 2007 to reduce the risk of injury from falls up to heights of 2.8 metres.
Falls from these heights, traditionally account for the largest number of injuries on building sites, transport and other areas where protection is needed any system that can reduce this risk must be seriously considered.
Design
What makes the Fall-Pac system your best
choice is that it has been designed to be both
practical and hard wearing. It can be used
over and over again.
By adding another layer, the maximum fall height can be increased to a height of 5.6m.
Impact Testing
The Fall-Pac modular impact cushioning system
has been fully independently tested at
Health & Safety Laboratories who carried out over
300 impact tests, using 90% anthropomorphic dummy (Crash test dummies) with accelerometer fitted along the spinal channel.
A full report is available on request.
Links to HSE website:
HSE Home:
http://www.hse.gov.uk/falls/index.htm
Full Work at Height Reglations document
http://www.opsi.gov.uk/si/si2005/20050735.htm
Work at Height (Amendment) Regulations 2007
http://www.legislation.gov.uk/uksi/2007/114/made
